Quick Answer: The xTool F2 Ultra pairs a 60W MOPA fiber laser with an optional 40W diode in an enclosed desktop galvo body starting around $4,299 single-laser / $5,299 dual-laser. It runs up to 15,000 mm/s on a 220×220mm bed (expandable to 220×500mm with a conveyor), uses dual 48MP cameras for placement, and its MOPA fiber source produces genuine, repeatable color engraving on stainless steel and titanium — a real technical step up from the standard F2’s limited color effects. Buy it if color metal engraving is core to your business; if you just need faster metal marking without MOPA color, the far cheaper standard xTool F2 or F1 Ultra will save you thousands.
xTool’s F2 Ultra sits at the top of the portable F-series, and the name is misleading if you only skim it: it isn’t a faster F2, it’s a different class of machine built around a true MOPA fiber laser instead of the F2’s standard IR module. That distinction — MOPA versus standard fiber/IR — is the entire reason this machine costs three to four times as much as the standard xTool F2 reviewed separately. This review covers what the F2 Ultra actually does, where the extra cost goes, and who should buy it instead of the cheaper F-series machines already covered in our best laser engraver for jewelry and best fiber laser engraver guides.
xTool F2 Ultra at a glance
| Spec | xTool F2 Ultra |
|---|---|
| Laser type | 60W MOPA fiber (1064nm), optional 40W diode (455nm) |
| Max speed | Up to 15,000 mm/s |
| Work area | 8.7"×8.7" (220×220mm); to 8.7"×19.7" (220×500mm) with conveyor |
| Metal color engraving | Yes — MOPA fiber produces genuine color on stainless steel and titanium |
| Metal marking/engraving | Stainless steel, titanium, copper, brass, anodized aluminum, gold, silver |
| Wood/leather/acrylic | Cuts and engraves via the optional 40W diode module |
| Camera | Dual 48MP cameras with auto-placement |
| Enclosure | Fully enclosed, studio/office-suitable |
| Software | xTool Creative Space (XCS) |
| Price (2026) | ~$4,299 single-laser; ~$5,299 dual-laser (higher for conveyor/Deluxe bundles) |
| Best for | Jewelry studios, metal-goods production, color-marking businesses |
xTool F2 Ultra by the numbers
- The MOPA fiber module runs at 60W (1064nm), paired with an optional 40W diode (per xTool and independent specs on LasersCompare) — MOPA lets you independently control pulse width and frequency, which standard fiber and IR lasers can’t do, and that control is what produces real color rather than single-tone marking.
- Top speed reaches 15,000 mm/s, roughly 2.5x the standard F2’s 6,000 mm/s (per LasersCompare) — meaningful for shops running repeat batches of the same metal blank all day.
- The 220×220mm bed expands to 220×500mm with an optional conveyor attachment (per LasersCompare) — enough for continuous production runs of tags, blanks, or small parts without manually repositioning stock.
- Dual 48MP cameras handle auto-placement (per LasersCompare) — a step up even from the standard F2’s already-strong 50MP single-camera system, aimed at high-volume studios that can’t afford to eyeball alignment on every piece.
- Pricing runs from roughly $4,299 for the single-laser (MOPA-only) build up to nearly $6,969 for a Deluxe dual-laser bundle with conveyor (per LasersCompare) — real reviewers note this positions the F2 Ultra as a studio/production investment, not an impulse buy.
What the xTool F2 Ultra does well
Genuine MOPA color engraving. This is the whole point of the machine. Unlike the standard F2’s limited color effects, MOPA’s independent pulse-width and frequency control produces a real, repeatable color palette on stainless steel and titanium — the same core technology used in industrial jewelry-marking systems. For a shop selling color-engraved metal goods, that capability alone can justify the price gap over the F1 Ultra or standard F2.
Speed built for production, not hobbying. At up to 15,000 mm/s, the F2 Ultra clears repeat batch work — trays of jewelry blanks, rows of engraved tags — far faster than any other machine in xTool’s portable lineup, and the optional conveyor extends that into genuinely continuous production runs.
Placement accuracy for volume work. Dual 48MP cameras with auto-placement matter most when you’re running dozens or hundreds of near-identical pieces a day; small alignment errors compound fast at that volume, and this is the most capable camera setup xTool puts on a desktop machine.
Stocking up on metal blanks and jewelry stock for a production run? A free Amazon Prime trial gets two-day delivery on supplies while you’re dialing in color settings.
xTool F1 Ultra vs xTool F2 vs xTool F2 Ultra
| xTool F1 Ultra | xTool F2 | xTool F2 Ultra | |
|---|---|---|---|
| Lasers | 20W fiber + 20W diode | 5W IR + 15W diode | 60W MOPA fiber + 40W diode (optional) |
| Max speed | 10,000 mm/s | 6,000 mm/s | 15,000 mm/s |
| Work area | 220×220mm (to 220×500mm w/ conveyor) | 110×110mm (400×115mm w/ slide extension) | 220×220mm (to 220×500mm w/ conveyor) |
| Metal color engraving | No | Limited | Yes, true MOPA color |
| Metal cutting | Thin sheet (0.3mm stainless) | No | Marking/engraving-focused, not a heavy cutter |
| Camera | 16MP smart camera | 50MP, ~0.1mm accuracy | Dual 48MP cameras |
| Price (2026) | ~$1,999 | ~$1,499 | ~$4,299–$5,299+ |
The jump from the F1 Ultra or standard F2 to the F2 Ultra is a jump in category, not just spec numbers — you’re paying for MOPA fiber technology and production-grade speed and cameras, not an incremental refresh. If you need to mark and cut thin metal on a budget, the F1 Ultra remains the better value. If you want faster general marking with basic color effects at a fraction of the cost, the standard F2 is the sensible pick. The F2 Ultra only makes financial sense when color-engraved metal is a real, recurring line of business. For the rest of xTool’s lineup including the enclosed S1 and CO2 P2S, see our best xTool laser engraver ranking.
Where the xTool F2 Ultra falls short
- The price is a real barrier. At $4,299 to nearly $6,969 depending on configuration and bundle, this is a studio/production purchase, not an entry-level or even mid-range one — most hobbyists and small side businesses will never recoup the cost difference over an F1 Ultra or standard F2.
- Color engraving takes practice. Hands-on reviewers note that vivid, consistent color on metal isn’t a one-click result; expect to build a settings library through test grids on each metal type and finish before production-quality color becomes routine.
- Not a heavy-duty metal cutter. Like other galvo machines, it’s built for marking, engraving, and color work rather than cutting thick stock — it won’t replace a plasma cutter or an industrial fiber cutting system.
- The diode module costs extra. The base single-laser configuration is MOPA-only; if you also need to cut or engrave wood, leather, or acrylic, you need the dual configuration, which adds roughly $1,000 to the price.
Who should buy the xTool F2 Ultra
The xTool F2 Ultra is the right buy for jewelry studios, metal-goods producers, and small-business owners running daily or weekly color-engraving volume on stainless steel or titanium who have already outgrown the standard F2’s limited color capability. It’s not the pick for casual makers, occasional metal marking, or anyone whose budget tops out under $2,000 — the standard xTool F2 or F1 Ultra covers those needs at a fraction of the price. For buyers weighing the full metal-capable lineup, see our best fiber laser engraver and best laser engraver for jewelry guides.
Ready to buy? Compare single vs. dual-laser configurations and check today’s price: