Quick Answer: The Gweike Cloud Pro II is a 50W CO2 laser with a 20.08×11.8in (510×300mm) bed, a 5MP AI-positioning camera rated to roughly ≤2mm accuracy, and speeds up to 600mm/s. It ships with a built-in water chiller, air compressor, exhaust fan, rotary attachment, and honeycomb table included, and Gweike lists it directly at $1,659 (marked down from $3,150 list). It cuts roughly 15mm basswood in multiple passes. Buy it if minimizing upfront cost is the top priority; step up to the OMTech Polar if camera accuracy and a larger support community matter more than saving a few hundred dollars.
The Gweike Cloud Pro II has been referenced as the “budget desktop champion” across this site’s CO2 roundups — best CO2 laser engraver, best laser engraver, best laser engraver for glass, best laser engraver for acrylic, best laser engraver for cutting boards — without a dedicated review of its own. This one covers what you actually get in the box, what it cuts, and how it stacks up against the OMTech Polar and xTool P2S.
Gweike Cloud Pro II at a glance
| Spec | Gweike Cloud Pro II |
|---|---|
| Laser type | 50W CO2 glass tube (10,000hr rated life) |
| Work area | 20.08×11.8in (510×300mm) |
| Max speed | 600mm/s |
| Focus | AI visual / material recognition / material set-up autofocus |
| Camera | 5MP wide-angle, ~≤2mm placement accuracy |
| Cut depth (multi-pass) | ~15mm basswood |
| Included accessories | Rotary attachment, water chiller, air compressor, exhaust fan, honeycomb table |
| Price (2026) | $1,659 (list $3,150) |
Gweike Cloud Pro II by the numbers
- Lists directly at $1,659 on Gweike’s own site, marked down from a $3,150 list price, per gweikecloud.com’s Cloud Pro II product page — with a rotary attachment, built-in water chiller, air compressor, exhaust fan, and honeycomb table bundled in rather than sold as separate add-ons.
- Camera placement accuracy runs roughly ≤2mm, per Gweike’s own spec sheet, closely matched by an independent hands-on test from Hobby Laser Cutters, which measured 1–2mm accuracy after running Lightburn’s camera calibration routine.
- Rated top speed of 600mm/s, per the official spec sheet — faster on paper than the OMTech Polar’s 500mm/s, though Hobby Laser Cutters notes the Y-axis moves slower in practice because it carries the heavier CO2 tube.
- Third-party reseller pricing varies widely — Top3DShop listed the same Cloud Pro II at $3,499 at time of writing, more than double Gweike’s own direct price, so buying straight from gweikecloud.com or checking Amazon’s current listing is worth doing before paying a reseller markup.
What the Gweike Cloud Pro II does well
The lowest real entry price into 50W CO2 cutting. At $1,659 with a rotary axis, chiller, air compressor, and honeycomb table all bundled in, it undercuts every other 50W-class desktop CO2 machine this site has reviewed by hundreds of dollars — see best CO2 laser engraver for how it stacks up against the field.
Genuinely fast rated speed. A 600mm/s top speed beats the OMTech Polar’s 500mm/s on paper, and Hobby Laser Cutters’ hands-on testing found photo engraving noticeably quick at those speeds.
Multiple autofocus modes instead of manual-only. AI visual autofocus, material recognition autofocus, and material set-up autofocus all ship standard — a step up from machines in this price range that require manual Z-height adjustment for every material change.
Running an engraving business? A free Amazon Business account unlocks quantity discounts and tax-exempt purchasing on the acrylic sheets, wood blanks, and tube-cooling fluid you’ll be restocking.
Gweike Cloud Pro II vs OMTech Polar
| Gweike Cloud Pro II (50W) | OMTech Polar (50W) | |
|---|---|---|
| Work area | 510×300mm (20.08×11.8in) | 510×300mm (20×11.8in) |
| Camera accuracy | ~≤2mm | ~1mm |
| Max speed | 600mm/s | 500mm/s |
| Focus | AI/material autofocus | Manual Z-focus |
| Price (2026) | $1,659 | $2,299.99 |
The gap here is mostly about price versus track record. The OMTech Polar costs roughly $640 more but comes from a brand with a longer history in desktop CO2 lasers and a slightly tighter camera accuracy (~1mm versus the Gweike’s ~2mm). The Gweike Cloud Pro II answers back with a genuinely lower price, a faster rated top speed, and autofocus the manual-focus-only Polar doesn’t have. If your budget is the binding constraint and you’re comfortable troubleshooting with a smaller community, the Cloud Pro II gets you real 50W CO2 cutting for hundreds less; if placement accuracy and established brand support matter more than the price gap, the Polar is the safer buy. For the full CO2 field at every price point, see our best CO2 laser engraver roundup.
Where the Gweike Cloud Pro II falls short
- Loosest camera accuracy of the budget CO2 field. At roughly ≤2mm, it trails both the OMTech Polar (~1mm) and the xTool P2S’s dual-camera 0.3mm-rated system — fine for rough placement, not for tight inlay work.
- Reseller pricing is inconsistent. Third-party listings can run double Gweike’s own direct price, so always check gweikecloud.com or Amazon’s current listing rather than assuming any reseller quote is accurate.
- Smaller installed base than OMTech or xTool. Fewer long-term owners means less community troubleshooting content and firmware history to lean on if something goes wrong.
- Multi-pass cutting for thicker material. Roughly 15mm basswood needs multiple passes rather than the Polar’s single-pass 10mm rating on comparable material — plan for slower thick-material jobs.
Who should buy the Gweike Cloud Pro II
The Gweike Cloud Pro II is the right choice for budget-focused makers who want the lowest real entry price into 50W CO2 cutting — with a rotary axis, chiller, air compressor, and honeycomb table already in the box. It’s not the pick if camera-guided placement precision or an established brand support community is a priority (the OMTech Polar or xTool P2S fit better there). For the full lineup, see our best CO2 laser engraver and best laser engraver guides.
Ready to buy? Compare current bundle pricing and check today’s deal: