Quick Answer: AP Lazer builds open-architecture CO2 and fiber lasers whose laser top lifts off its base and rides on an electric lift cart, so it can engrave objects too big or heavy for a boxed machine, such as granite headstones, doors and floors. On aplazer.com on November 11, 2026, prices ran from $5,499 (Studio, 30W CO2, Builder package) to $63,999 (SN6240DLR, 120W CO2 + MOPA fiber), with the turnkey packages AP Lazer leads with at $9,999 to $52,999. Buy one if large-object engraving is your business; for flat sheet work, boxed CO2 lasers such as Boss Laser’s LS-1630 (80W, 16 x 30 in, $7,197) cost far less. Independent feedback is thin and mixed: Trustpilot shows 2.9 from 10 reviews and the only BBB review is 1 star.

Last updated: November 11, 2026. Prices were read that day from aplazer.com, AP Lazer’s store (shop.aplazer.com) and the stores of the competing brands named below.

This review is research, not a bench test. We compared AP Lazer’s model pages, price-comparison page, FAQ, parts store and refund policy with Google Patents, the Better Business Bureau, Trustpilot and the published prices of comparable CO2 and fiber lasers. We found no independent lab or magazine test of a current AP Lazer machine, so where a claim comes only from AP Lazer, we say so. People also search for the brand as “AP Laser”; it is the same company. For the wider market, see our best CO2 laser engraver guide and our Boss Laser review.

Check current prices on eBay →

AP Lazer at a glance

Fact (Nov 11, 2026)AP Lazer
What it sellsOpen-architecture CO2 lasers, CO2 + MOPA fiber "dual lasers" and fiber galvo markers, sold as packages
Price range$5,499 to $63,999 (machines); fiber cutting machines from $78,995
Signature featureLaser top lifts off its base onto an electric lift cart, a conveyor or the object itself
Headquarters4215 Legion Drive, Mason, Michigan
AssemblyWindsor, Ontario per AP Lazer's FAQ (AP Lazer Canada Mfg., Oldcastle, Ontario)
FounderDr. Tong Li, who began designing the machine in 2009 for granite memorials, per AP Lazer
Controller and softwareRuida DSP controller; RDWorks, LightBurn, CorelDRAW and PhotoGraV in the bigger packages
Warranty"3-2-1" (3 yr parts, 2 yr tube and mirrors, 1 yr lens); Starter Line 1, 2 or 3 years by package
Returns30 days to request; 15% restocking fee on laser machines
How you buyQuote and phone sales; financing through third-party lenders
RecallsNone in CPSC's recall database

AP Lazer by the numbers

AP Lazer models and prices

AP Lazer sells two CO2 lines and one fiber line. The Starter Line comes in three packages; the Business Line and the fiber marker are sold as turnkey packages only.

Model (aplazer.com, Nov 11, 2026)LaserEngraving areaMax object height on cartPowerPrice
Studio SN1812LR (Starter)30W CO218 x 12 in27 in110 V, 500 W$5,499 Builder / $7,499 Accelerator / $9,999 Turnkey
Inspire SN2616DLR (Starter)60W CO2; MOPA +$4,999 (30W) or +$6,999 (60W)26 x 16 in28 in110 V, 725 W$8,499 / $12,999 / $15,999
SN2816DLR (Business)90W CO2; MOPA +$4,999 / +$6,999 / +$8,99928 x 16 in33 in110 V, 1,050 W$23,999 turnkey
SN4024DLR (Business)100W CO2; MOPA +$6,999 / +$8,99940 x 24 in33 in110 V, 1,050 W$33,999 turnkey
SN4836DLR (Business)100W CO2; MOPA +$6,999 / +$8,99948 x 36 in33 in110 V, 1,050 W$39,999 turnkey
SN6240DLR60W or 120W Iradion CeramiCore RF CO2 + 60W MOPA fiber62 x 40 in40 in240 V 30 A, 2,500 W$52,999 / $63,999; 100W MOPA +$1,899
APG-LR (fiber galvo)50W fiber, 60W MOPA or 100W MOPA4 x 4 or 6 x 6 in22.3 in110 V, 770 W$13,995 / $17,995 / $20,995

Rated engraving speed is 0 to 30 inches per second on the Starter Line, 0 to 50 in/s on the Business Line and 0 to 79 in/s on the SN6240DLR, per AP Lazer’s spec tables. The store at shop.aplazer.com also lists a refurbished 50W APG-LR at $11,995, a 300W CO2 cutting machine (SwiftCut APC5236) at $35,559 and fiber laser cutting machines from $78,995, which are outside the scope of this review.

The “D” in the Business Line names means dual-laser ready. A Business Line machine bought as CO2 only can take a MOPA fiber source later, which matters because a CO2 laser cannot mark bare stainless steel or aluminum. Our fiber vs CO2 laser comparison explains which materials need which source.

Builder, Accelerator or Turnkey: what the extra $4,500 buys

The Starter Line packages share the same machine. What changes is the support, software and warranty around it:

Package (AP Lazer Starter Line page)BuilderAcceleratorTurnkey
Studio SN1812LR (30W)$5,499$7,499$9,999
Inspire SN2616DLR (60W)$8,499$12,999$15,999
Electric lift cart, honeycomb table, exhaust blower, air assistYesYesYes
Warranty1 year2 years3 years
Rotary attachmentNoYesYes
Laptop with LightBurnNoYesYes
Guided setup and trainingNoYesYes
24/7 supportNot listedSix monthsLifetime
ExtrasOnline community"Silver savings""Gold savings", continued education

Part of the Turnkey premium is hardware you could price yourself. AP Lazer’s own parts store sells its rotary attachment with slider at $849.99, and LightBurn sells a Pro licence, the edition needed for Ruida controllers, at $199 one-time. That is about $1,050 of the Studio’s $4,500 step from Builder to Turnkey. The rest pays for a laptop, training, two more years of warranty and support with no end date. If you have used a Ruida-controlled CO2 laser before, the Builder or Accelerator package is the cheaper way into the same machine. If you have not, support is the part of the package that matters most, and the Builder lists none.

What AP Lazer’s own pages disagree on

AP Lazer publishes its prices and specs on several pages and in a Shopify store, and on November 11, 2026 they did not agree with each other. Get every figure that matters to you written into the quote.

ItemOne AP Lazer page saysAnother says
Inspire CO2 power60 W (model page, spec tables, price comparison)90 W (second Inspire card on the Starter Line page)
SN6240DLR price$52,999 (model page, price comparison, store)$42,999 (dual-laser page card, under a "$52,999" heading)
SN6240DLR 100W MOPA upgrade+$1,899 (model page, price comparison, store)+$8,999 (Explore All Models and dual-laser cards)
SN6240DLR power draw2,500 W rated (model page)3,800 W maximum (price comparison)
APG-LR marking area4 x 4 in (models page); 4 x 4 or 6 x 6 in (model page)11.5 x 11.5 in (price comparison)
Inspire turnkey price$15,999 (aplazer.com)$22,999 (SN2616LR turnkey listing on shop.aplazer.com)
SN4836DLR financing example$950 a month (model page)$1,021 a month (price comparison)
Warranty"3-2-1": 3 yr parts, 2 yr tube and mirror, 1 yr lens (FAQ)"3 Years Warranty" (price comparison); 1, 2 or 3 years by package (Starter Line)
LightBurn includedOnly SN1812LR and SN2616LR (FAQ)Every machine (price comparison); not in Builder packages
Training"Unlimited Training" (home page)"2 Full Training Sessions" (price comparison)
Store "compare at" pricesStudio Turnkey $9,999 vs compare-at $9,995APG-LR $13,995 to $20,995 vs compare-at $12,995

The FAQ also lists Windows XP, 7, 8 and 10 as supported systems and RDWorks v8 as the software, which reads as text that has not been revised in years. None of these differences proves anything is wrong with the machines, but together they mean the web pages are not a reliable spec sheet. The quote is.

How the open-architecture design works

AP Lazer calls its machine a three-part system: a laser top, a home base and a utility carriage. The FAQ describes three ways to use it:

  1. As a boxed laser. Leave the top on its home base and it works like any enclosed CO2 machine.
  2. On the lift cart. Put the top on the electric lift cart and roll objects up to 27 inches tall (Studio) or 33 inches (Business Line) under the beam, or place the top over a conveyor.
  3. On the object. Set the top directly on a large surface; AP Lazer’s EZ-leveling system and sensors are meant to let it engrave “on any flat surface,” and its SN4024DLR and SN4836DLR pages say the beam can drop to 1 inch from the floor.

That is how AP Lazer machines engrave granite memorials, tabletops, doors, barrels and flooring, the jobs that show up again and again in owner reviews and AP Lazer’s customer stories. The limit is that the engraving area does not grow with the object. A Studio still covers 18 x 12 inches per placement and an SN4836DLR 48 x 36 inches, so a design larger than that is engraved in sections, with the top moved and re-aligned between them. Boss Laser makes the same point on its own AP Lazer comparison page, which is competitor marketing, but the geometry is not in dispute.

The design is patented. Google Patents lists Tong Li as inventor on US 8,309,881 “Portable engraving system” (granted November 13, 2012), US 10,654,127 (2020, a laser cabinet with a three-point suspension for mounting on a surface), and US 11,446,761 (2022) and US 11,759,887 (2023), which describe an inverted X-Y gantry with a counterweight on the drive belt. In the 2023 patent, that counterweight is “a second, independently activatable laser,” which is the idea behind AP Lazer’s dual-laser machines. All four list the assignee as an individual rather than the company.

If your large objects are long but flat, such as signs or planks, you may not need any of this: boxed machines with pass-through doors, like Boss Laser’s LS series, feed long stock through the cabinet. Open architecture earns its price on objects that are too tall or too heavy to go through a door at all. For stone work specifically, see our best laser engraver for stone guide.

Running costs: tubes, power and parts

The Starter and Business Line machines use replaceable CO2 tubes; AP Lazer’s parts store sells a water pump assembly, radiator and antifreeze coolant for them. These are the published tube figures:

Tube (fits)Rated life (AP Lazer FAQ)Replacement (shop.aplazer.com)Tube cost per laser hour
30W (SN1812 Studio)1,500 hours$295About $0.20
60W (SN2616 Inspire)8,000 hours$599About $0.075
90W (SN2816)8,000 hours$1,095About $0.14
100W (SN4024, SN4836)10,000 hours$1,250About $0.125
130W (upgraded SN4024/SN4836)Not stated$1,450-

The Studio’s 30W tube is rated for less than a fifth of the 60W tube’s life. At 20 laser hours a week, 1,500 hours is about 75 weeks, so a busy Studio will need a new tube in under a year and a half. The SN6240DLR uses an Iradion CeramiCore RF source instead, which AP Lazer says lasts longer and performs more consistently than glass tubes; it publishes no hour rating for it.

Other parts are ordinary CO2-laser prices: focus lenses $59.99, mirrors $19.99, a 6-inch exhaust blower $359, CO2 safety glasses $59, and a Ruida controller unit $325. Every CO2 model except the SN6240DLR runs on a standard 110 V outlet; the SN6240DLR needs a 240 V, 30 A circuit. Our laser engraver cost guide covers running costs across all laser types.

The financing math

AP Lazer’s financing goes through third-party lenders. Its financing page says terms are commonly 36 to 60 months and a lending specialist often follows up within 4 to 8 business hours. The price-comparison page shows a monthly figure for each machine, “based on a 5-year finance term, 600-700 credit score” and at least two years of business history, and labels the figures hypothetical. Multiplied out:

MachineTurnkey priceAP Lazer's monthly exampleTotal over 60 paymentsAbove cash price
Studio SN1812LR$9,999$225$13,500+35%
APG-LR 50W$13,995$317$19,020+36%
Inspire SN2616DLR$15,999$385$23,100+44%
SN2816DLR$23,999$590$35,400+48%
SN4024DLR$33,999$817$49,020+44%
SN4836DLR$39,999$1,021$61,260+53%

AP Lazer’s FAQ argues the machine pays for itself through high-margin products, giving the example that an engraved tumbler costs about $9.75 to produce and usually retails for around $34. That is AP Lazer’s figure, not an audited one. Our laser engraving business guide walks through pricing your own products before you take on a five-year payment.

Warranty and returns

AP Lazer’s FAQ describes a “3-2-1 Warranty”: three years on parts, two years on the tube and mirrors, one year on the lens, and notes that the SN1812 Studio has “a slightly different warranty.” On the Starter Line the warranty length follows the package: 1 year with Builder, 2 with Accelerator, 3 with Turnkey. The price-comparison page simply says “3 Years Warranty.” Because the pages differ, ask for the warranty terms to be printed on your quote, including what the tube and lens coverage is on your package.

Returns are possible but costly. The refund policy on shop.aplazer.com allows 30 days after delivery to request a return, says “Returned Laser Machines are subjected to a 15% restocking fee,” and excludes shipping and handling from the refund. That is about $1,500 on a $9,999 Studio Turnkey and about $7,950 on a $52,999 SN6240DLR, before freight. Sale items cannot be returned at all.

What owners report

There is not much independent feedback on AP Lazer, and what exists is split.

The pattern is consistent: the long-running Starter and Business Line machines have loyal owners who value the support, and the newest, most expensive model has at least one serious public failure. If you are considering the SN6240DLR, ask AP Lazer how many are in the field and ask to speak to an owner.

AP Lazer vs the alternatives

The comparison that matters is not spec for spec, because no boxed laser can sit on a headstone. It is how much you pay for that ability:

Machine (maker's store, Nov 11, 2026)LaserWork areaPriceWhat is included
AP Lazer Studio SN1812LR30W CO218 x 12 in$5,499 / $9,999 turnkeyLift-off top, electric lift cart, exhaust blower, air assist
AP Lazer Inspire SN2616DLR60W CO226 x 16 in$8,499 / $15,999 turnkeySame, MOPA fiber optional
Boss Laser LS-142070W CO214 x 20 in$4,497Floor-standing, front pass-through; air pump and water pump
Boss Laser LS-163080W CO216 x 30 in$7,197Floor-standing; chiller option $7,944
Boss Laser LS-3655105W CO236 x 55 in$10,497Large-format production machine
OMTech Pronto 3560W CO220 x 28 in$3,479.99Standard package
Monport Reno6565W CO224 x 16 in$1,599.99Desktop, built-in water cooling
AP Lazer APG-LR50W fiber galvo4 x 4 or 6 x 6 in$13,995 turnkeyLift cart, laptop, LightBurn, fume extractor, jewelry rotary
OMTech Galvo 50W50W fiber galvoNot compared here$2,399.99Autofocus marking machine

For the price of AP Lazer’s smallest turnkey package ($9,999 for 30W and 18 x 12 inches), Boss Laser sells a 105W LS-3655 with a 36 x 55 inch bed ($10,497). Monport’s Reno65 has a work area close to the Inspire’s for less than a fifth of the Inspire Builder price. Those machines do not include AP Lazer’s laptop, software bundle, rotary, training or lifetime support, and none of them can be lifted off its bed. That is the trade: AP Lazer charges several times the boxed-laser price for mobility, a complete package and phone support. For a business whose products are large objects, that can be worth it. For one that cuts and engraves sheet stock, it is not.

AP Lazer Studio SN1812LR

Entry point to the lift-off design · $5,499 Builder to $9,999 Turnkey on aplazer.com (Nov 11, 2026)
  • 30W CO2, 18 x 12 in engraving area, objects up to 27 in tall on the cart, 110 V.
  • Electric lift cart, honeycomb table, exhaust blower and air assist in every package.
  • 30W tube rated 1,500 hours; replacement $295.
  • Warranty 1, 2 or 3 years depending on package; AP Lazer's FAQ says the SN1812 warranty differs from the 3-2-1 terms.

AP Lazer Inspire SN2616DLR

Best-value AP Lazer for most shops · $8,499 Builder to $15,999 Turnkey on aplazer.com (Nov 11, 2026)
  • 60W CO2 (one AP Lazer page says 90W), 26 x 16 in, objects up to 28 in tall on the cart.
  • 60W tube rated 8,000 hours for $599, about 7.5 cents per laser hour.
  • MOPA fiber option: +$4,999 (30W) or +$6,999 (60W).
  • AP Lazer's store lists an SN2616LR turnkey at $22,999, so confirm the price in your quote.

AP Lazer SN4836DLR

Large-format monument and sign machine · $39,999 turnkey on aplazer.com (Nov 11, 2026)
  • 100W CO2, 48 x 36 in engraving area, objects up to 33 in tall; beam drops to 1 in from the floor.
  • MOPA fiber +$6,999 (60W) or +$8,999 (100W); store price with 100W MOPA $48,998.
  • Runs on 110 V at 1,050 W rated; 100W tube rated 10,000 hours, replacement $1,250.
  • Financing example $950 or $1,021 a month over five years, depending on the page.

AP Lazer SN6240DLR

Flagship dual laser, newest and least proven · $52,999 to $65,898 on shop.aplazer.com (Nov 11, 2026)
  • 60W or 120W Iradion CeramiCore RF CO2 plus 60W MOPA fiber; 100W MOPA +$1,899.
  • 62 x 40 in engraving area, 0 to 79 in/s, objects up to 40 in tall; needs 240 V, 30 A.
  • One public BBB and Trustpilot review describes a non-working machine nearly four months after purchase.
  • Ask for owner references and acceptance terms before ordering.

AP Lazer APG-LR

Fiber galvo marker on a lift cart · $13,995 to $20,995 on aplazer.com (Nov 11, 2026)
  • 50W fiber, 60W MOPA or 100W MOPA, 1064 nm, up to 470 in/s.
  • Marking area 4 x 4 or 6 x 6 in per the model page (11.5 x 11.5 in on another page).
  • Turnkey: laptop, LightBurn, fume extractor, lift cart, jewelry rotary, 290 mm lens.
  • Refurbished 50W unit $11,995 on AP Lazer's store; desktop 50W fiber markers from other brands start near $2,400.

What AP Lazer does well

Where AP Lazer falls short

Who should buy an AP Lazer

Buy an AP Lazer if your products are large, heavy or fixed in place: monument and memorial shops, sign makers working on finished pieces, furniture and flooring businesses, and schools that want one machine for both small parts and big projects. In that case, the Inspire SN2616DLR Turnkey is the sensible starting point: 60W, a long-life tube and the full support package for $15,999. Choose the SN4836DLR when single-pass area matters more than budget.

Skip AP Lazer if you cut and engrave flat sheet stock. A boxed CO2 such as a Boss Laser, OMTech or Monport gives you more power and bed for the money, and our best CO2 laser cutter for small business guide ranks the options. If you only need to mark metal, a desktop fiber marker from our best laser marking machine list costs a fraction of the APG-LR.

The bottom line

AP Lazer sells a genuinely different kind of CO2 laser: a laser top that lifts off its base, rolls on a lift cart and engraves objects no boxed machine can hold. That is worth paying for if large objects are your business, and AP Lazer’s long-time owners rate its phone support highly. But the premium is steep ($9,999 buys a 30W, 18 x 12 inch Studio Turnkey), the company’s own pages disagree on key numbers, returns cost 15%, and the flagship SN6240DLR has a public failure on record. Get every price, spec, warranty term and training promise written into your quote before you sign.

Sources